| Title: | Design Graphics |
|---|
| Long Title: | Design Graphics |
|---|
| Field of Study: |
Civil Engineering
|
| Valid From: |
Semester 1 - 2019/20 ( September 2019 ) |
| Module Coordinator: |
DES WALSH |
| Module Author: |
TED MC KENNA |
| Module Description: |
This module aims to give the student a comprehensive introduction to industry standard methods for communicating engineering design intent. Learners will gain practical knowledge of the use of relevant 2D/3D digital modelling tools while they will also develop hand sketching techniques. The student will be expected to produce both a hardcopy and a digital portfolio, comprising hand sketches, 3D models, drawings and/or other appropriate media. |
| Learning Outcomes |
| On successful completion of this module the learner will be able to: |
| LO1 |
Produce, edit and print 2D drawings using industry standard digital tools. |
| LO2 |
Develop 3D parametric models of components and/or buildings using industry standard digital tools. |
| LO3 |
Produce 2D/3D annotated hand sketches/drawings. |
| LO4 |
Manage digital portfolio within a structured file management system. |
| LO5 |
Produce a hardcopy portfolio conveying engineering requirements graphically. |
| Pre-requisite learning |
Module Recommendations
This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
|
|
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list. |
| No incompatible modules listed |
Co-requisite Modules
|
| No Co-requisite modules listed |
Requirements
This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
|
| No requirements listed |
Module Content & Assessment
| Indicative Content |
|
Hand sketching/drawing
Using techniques to develop conversational sketches, sectional, isometric and perspective sketches/drawings for components/systems intrinsic to buildings and/or elements of infrastructure. Sketches may be presented as isolated or combined in philosophy/storyboard form.
|
|
Introductory 2-D Drawings
Generate 2-D drawings with industry standard digital tools using draw and modify tools. Use of model and paper space.
|
|
3-D parametric modelling - basic components
Develop basic solid models involving sketching a profile, setting dimensions and constraints, basic features e.g. extrude, revolve, holes, chamfer, pattern features etc.
|
|
3-D parametric modelling - basic building structure
Develop a model of a basic building using grids, levels, elements and imported component families.
|
|
File Management
Utilise a structured file management system to manage the storage and retrival of files.
|
|
Portfolio
Generate a portfolio of 2D and 3D drawings, dimensioned and printed to scale on an appropriate template.
|
| Assessment Breakdown | % |
|---|
| Course Work | 100.00% |
| Course Work |
|---|
| Assessment Type |
Assessment Description |
Outcome addressed |
% of total |
Assessment Date |
| Practical/Skills Evaluation |
Generate 2D working drawing(s). |
1,4,5 |
10.0 |
Week 5 |
| Practical/Skills Evaluation |
Produce 3D parametric model(s) and 2D engineering drawing(s). |
2,4,5 |
10.0 |
Week 9 |
| Project |
Portfolio of outputs from digital models created throughout the semester. |
1,2,4,5 |
50.0 |
Week 13 |
| Project |
Develop a portfolio of hand sketches/drawings created throughout the semester and presented as a complete portfolio. |
3,5 |
30.0 |
Week 13 |
| No End of Module Formal Examination |
| Reassessment Requirement |
Coursework Only
This module is reassessed solely on the basis of re-submitted coursework. There is no repeat written examination.
|
The institute reserves the right to alter the nature and timings of assessment
Module Workload
| Workload: Full Time |
| Workload Type |
Workload Description |
Hours |
Frequency |
Average Weekly Learner Workload |
| Lab |
Module material lecture; Software instruction; Exercise and assignment work. |
4.0 |
Every Week |
4.00 |
| Lecture |
Module material lecture; Instruction on manual sketching techniques. |
0.5 |
Every Week |
0.50 |
| Independent & Directed Learning (Non-contact) |
Module material revision; Exercise and assignment work. |
2.5 |
Every Week |
2.50 |
| Total Hours |
7.00 |
| Total Weekly Learner Workload |
7.00 |
| Total Weekly Contact Hours |
4.50 |
| Workload: Part Time |
| Workload Type |
Workload Description |
Hours |
Frequency |
Average Weekly Learner Workload |
| Lab |
Module material lecture; Software instruction; Exercise and assignment work. |
4.0 |
Every Week |
4.00 |
| Lecture |
Module material lecture; Instruction on manual sketching techniques. |
0.5 |
Every Week |
0.50 |
| Independent & Directed Learning (Non-contact) |
Module material revision; Exercise and assignment work. |
2.5 |
Every Week |
2.50 |
| Total Hours |
7.00 |
| Total Weekly Learner Workload |
7.00 |
| Total Weekly Contact Hours |
4.50 |
Module Resources
| Recommended Book Resources |
|---|
- Eric Wing 2017, Autodesk Revit 2017 for Architecture: No Experience Required, First Ed., John Wiley & Sons [ISBN: 9781119243304]
- Palm, B.S., Yarwood, A. 2015, Introduction to autocad 2016: 2D and 3D design, First Ed., Routledge New York [ISBN: 9781138925854]
- Elise Moss 2017, Autodesk Revit 2018 architecture basics, First Ed., SDC Publications [ISBN: 101630571113]
| | Supplementary Book Resources |
|---|
- Tony Hunt 2003, Tony Hunt's Second Sketchbook, Second Ed., Architectural Press [ISBN: 0750658967]
- Ron Slade 2016, Sketching for engineers and architects, First Ed., Routledge [ISBN: 9781138925403]
- Lance Kirby, Eddy Krygiel, Marcus Kim 2018, Mastering Autodesk Revit 2018, First Ed., John Wiley & Sons [ISBN: 101119386721]
| | This module does not have any article/paper resources |
|---|
| Other Resources |
|---|
- Website: Trevor FlynnUCL Drawing Gym
- Website: Autodesk Education
|
Module Delivered in
|
