#REQUEST.pageInfo.pagedescription#

Site Navigation

PHYS6007 - Instrument Calibration

banner1
Title:Instrument Calibration
Long Title:Instrument Calibration
Module Code:PHYS6007
 
Credits: 5
NFQ Level:Fundamental
Field of Study: Physics
Valid From: Semester 1 - 2016/17 ( September 2016 )
Module Delivered in 8 programme(s)
Module Coordinator: Donagh OMahony
Module Author: MARTIN WOODS
Module Description: This module introduces the learner to the principles of installation and calibration. Calibration terminology and calibration procedures of process industries are studied. The learner will calibrate a range of relevant process industry measurement systems.
Learning Outcomes
On successful completion of this module the learner will be able to:
LO1 describe the principles of calibration and the associated instrumentation
LO2 describe the procedures which must be followed to achieve reliable and reproducible calibration data
LO3 perform calibration on pressure, temperature, level and flow measurement instruments using standard calibration procedures
LO4 perform appropriate calibration techniques
LO5 measure, record and evaluate calibration data clearly, concisely and appropriately, and identify inherent errors
Pre-requisite learning
Module Recommendations
This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named CIT module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
7909 PHYS6008 Instrument Measurement
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
None
Co-requisite Modules
No Co-requisite modules listed
Requirements
This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
None
Co-requisites
No Co Requisites listed
 

Module Content & Assessment

Indicative Content
Principles of Calibration
Need for calibration against standards; types of calibration; traceability; calibration certification; validation; the National Standards Authority of Ireland and National Metrology Laboratory, ISO9001. Instrument Classification.
Pressure Calibration
Manometers. Dead-weight testers. Electronic Calibrators. Portable field Calibrators.
Data Analysis
Accuracy, precision, zero-error, proportionality error, hystersis, maximum non-linearity error, error as a percentage of span, error as a percentage of full-scale deflection, test uncertainty ratio.
Level Calibration
Tank Calibration. Liquid calibration, optical reference line, optical triangulation.
Flow Meter Calibration
Volumetric tank. Gravimetric tank. Pipe prover, reference meter. Flow calibration modes.
Temperature Calibration
International Practical Temperature Scale. Standard calibration instruments. Primary and secondary temperature standards. Temperature Calibrators: Block calibrator, oil bath.
Laboratory Practicals
Calibration of: a strain gauge (manometer), pressure gauges (dead weight testers and comparator) and pressure transducers (Drück pressure calibrator); thermocouples (block calibrator); variable area flow meter, orifice plate and Venturi meter (volumetric tank); d.c. electrical sources (Ronan calibrator).
Assessment Breakdown%
Course Work100.00%
Course Work
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Short Answer Questions Theory Assessment 1 1,2,5 20.0 Week 7
Practical/Skills Evaluation Weekly Lab Worksheets/Reports 2,3,4,5 35.0 Every Week
Practical/Skills Evaluation Lab Exam 3,4,5 25.0 Week 12
Short Answer Questions Theory Assessment 2 1,2,5 20.0 Sem End
No End of Module Formal Examination
Reassessment Requirement
Repeat examination
Reassessment of this module will consist of a repeat examination. It is possible that there will also be a requirement to be reassessed in a coursework element.

The institute reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Workload Description Hours Frequency Average Weekly Learner Workload
Lecture Module content delivery 1.0 Every Week 1.00
Lab Calibration Laboratory 2.0 Every Week 2.00
Lab Calibration Laboratory 2.0 Every Second Week 1.00
Independent & Directed Learning (Non-contact) Study of module material 3.0 Every Week 3.00
Total Hours 8.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 4.00
Workload: Part Time
Workload Type Workload Description Hours Frequency Average Weekly Learner Workload
Lecture Module content delivery 1.0 Every Week 1.00
Lab Calibration Laboratory 2.0 Every Week 2.00
Independent & Directed Learning (Non-contact) Directed study of module material 4.0 Every Month 1.00
Independent & Directed Learning (Non-contact) Study of completed module content 3.0 Every Week 3.00
Total Hours 10.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 3.00
 

Module Resources

Recommended Book Resources
  • Bela G Liptak, Kriszta Venczel 2016, Instrumentation and Automation Engineers' Handbook: Process Measurement and Analysis Volume 1, 5 Ed., CRC Press [ISBN: 1466559325]
  • Jay L. Bucher 2015, The Metrology Handbook, 2 Ed., 42, ASQ/Infotech [ISBN: 8174890386]
  • Keith R. Cheatle, 2006, Fundamentals of Test Measurement Instrumentation, Illustrated Ed., ISA [ISBN: 1556179146]
  • Mike Cable 2005, Calibration: A Technician's Guide, ISA [ISBN: 1556179129]
Supplementary Book Resources
  • Jay L. Bucher 2015, Quality Calibration Handbook - Developing and Managing a Calibration Program, 20, ASQ/Infotech [ISBN: 8174890335]
  • Alan S. Morris, Reza Langari 2015, Measurement and Instrumentation: Theory and Application, 2 Ed., 21, Academic Press [ISBN: 0128008849]
  • N. E. Battikha, 2007, The Condensed Handbook of Measurement and Control, 3rd Ed., ISA [ISBN: 1556179952]
This module does not have any article/paper resources
Other Resources
 

Module Delivered in

Programme Code Programme Semester Delivery
CR_EBENS_8 Bachelor of Engineering (Honours) in Building Energy Systems 2 Mandatory
CR_EMANF_7 Bachelor of Engineering in Manufacturing Engineering 2 Elective
CR_SINEN_8 Bachelor of Science (Honours) in Instrument Engineering 2 Mandatory
CR_SPHYS_7 Bachelor of Science in Applied Physics and Instrumentation 2 Mandatory
CR_SPHYS_6 Higher Certificate in Science in Applied Physics and Instrumentation 2 Mandatory
CR_EMECN_7 Parttime - Bachelor of Engineering in Mechanical Engineering 2 Elective
CR_SOMNI_8 Physical Sciences (Common Entry) 2 Group Elective 1
CR_SOMNI_7 Physical Sciences (Common Entry) 2 Group Elective 1

Cork Institute of Technology
Rossa Avenue, Bishopstown, Cork

Tel: 021-4326100     Fax: 021-4545343
Email: help@cit.edu.ie